|
1-831-338-8251
North American
Cutting Systems
provides CNC machine tool REPAIR
SERVICES on all of the types of equipment we sell. On-site
service for Plasma Cutting Machines, Oxyfuel Torches, Flame Cutters,
CO2 Lasers, Abrasive Waterjet Systems, CNC Controls - Repairs and
Retrofits, along with training on a wide variety of CNC equipment..
|
Featured
Used Laser Machines
All used machines are "Subject
to Availability" and or prior sale.
|
1992 Amada LCE 655 Laser System
1992 Amada Laser system (fixed beam)
Model LCE 655
50" x 50" (w/o reposition)
Fanuc 1500 watt laser
G.E. Fanuc OL CNC control Chiller system
Price - $17,500.00 |
2004 Bystronic Model Bystar 3015 Laser
5 ft. x 10 ft. dual pallet system
Copper grids on cutting tables
Bystronic CNC control
Bystronic laser 5,200 watts w/29.5k hrs.
Non-contact cutting heads 5" & 7.5"
Closed loop chiller system
Very well maintained
Price - $322,000 Reduced As Is Where Is
Details Contact Duane @ 612-867-0295 |
1998
Trumpf L3030 Laser System
5 ft. x 10 ft. cut zone
Dual pallet exchange system
3,000 watt laser (exchange in 2004)
Closed loop chiller, dust collector
Non-contact cutting head (5" & 7.5")
Bosch CNC control
Full mezzanine set-up as shown
Under power for viewing
Price - $109,000 Reduced As Is Where Is
Contact Duane @ 612-867-0295 |
|
1997 C.Behrens Laser System
Model CB3000
5
ft. x 10 ft. dual pallet flying optics system
2 slag / slug conveyors
2,000watt Rofin-Sinar laser DC020 26,340 hrs.
Koolant Koolers dual circuit chiller
Siemens 840D CNC control
Precitec non-contact cutting head
Under power for inspection
Machine available Immediately.
Buy with OR without Rofin Laser source.
Price $To Be Determined-offers considered
Details Contact Duane @ 612-867-0295 |
2003 Bystronic Byspeed 3015 w/4.4kw Laser
5 x 10 dual pallet system
Linear drive up to 6700 IPM simultaneous X/Y
Bystronic CNC control
Bystronic 4,400 watt laser
35.8k hrs.(re-built 10/09)
Non-contact cutting heads 5" & 7.5"
Copper cutting table grids
Price - $313,000 Reduced As Is Where Is
Details Contact Duane @ 612-867-0295 |
2004 Bystronic Bystar 3015 with 5.2kw Laser
5 x 10 Dual pallet system
Rack and pinion drive w/4400 IPM simultaneous X/Y
Bystronic CNC control
Bystronic 5,200 watt laser w/30.5k hrs.
Non-contact cutting heads, 5" & 7.5"
Closed loop chiller system
Price - $318,000 Reduced As Is Where Is
Details Contact Duane @ 612-867-0295 |
2000 Mazak Model NTX-48 Laser
4 ft. x 8 ft. cut zone
1500 watt Panasonic laser w/ ? ? hrs.
Non-contact cutting head
CNC control = L-32B
Under power
Price - $Call 612-867-0295 |
|
Featured
Used Plasma Oxyfuel Machines
|
1999 Komatsu Hydef plasma
$ MAKE OFFER !!
1999 Komatsu Fine Plasma
(2) - 6'x12' shuttle tables
120 amp Fine Plasma
The machine was purchased used in
Very Good condition in 2003-Never installed !
Stored inside until 2009 -
- Frame now stored
outside
- Power supply and controls stored inside
Excellent for rebuild or parts!
$ MAKE OFFER !! |
2006 Koike Mastergraph Millennium
Demo Machine - On Hold by owner!
$96,400.00
Hypertherm HPR 260 HyDefinition Plasma
1 oxyfuel
Size 12 X 20
Includes the water table
Let us know - Full formal quote avail.
We need your company contact data
for the proposal. |
(4) Water
Cutting Tables
10' x 50' cutting area
2 years old average
Price - $Make
Offer |
|
Esab Shadow II Plasma and Oxyfuel System
Vision 2000 CNC
8-feet X 10-Feet cutting area.
(Can be modified for 12-feet,
or upgraded to 20-feet.)
(1) 150-amp Plasma
(2) motorized Oxyfuel torch stations
(1) Tracing Eye for tracing patterns to CNC.
This machine is very low usage and has been in indoor storage for 14-years.
Price - $Make Any Offer !! |
6' by 20' Down Draft Table for
MG MMP
< No Picture >
Price - $ Call
CR Electronic Advanced Plasma System
5’ X 10’ Effective Cutting Area
Burny Phantom ST CNC Controller / Coordinated AC Drive System
Automatic Plasma Torch Height Control
HPR 260 HyPerformance Plasma (High Def)
This machine has gone through a complete restoration/refurbish and has passed our strict inspection process. It is in impeccable working condition.
The CNC, Drives, THC and Plasma system are all New each carrying a (1) year warranty.
Price - $98,000.00 |
1983 MG (10)Torch Cutting System
9'3" x 23'8" cutting area
(10) cutting torch heads
Price - $CALL |
|
Featured
Misc. Items
|
New Keller USA Model L-CUT-4-13S Collector
Engineered for thermal cutting processes
Airflow: 2,500 cfm (inside mounting)
SINBRAN Long Life or melt blown filters
Integrated spark arrestor
Integrated control incl differential pressure
Integrated exhaust silencer, very quiet
17.5 hp integrated fan 460/60Hz
Dimensions: 63” x 63” x 115”, 3,700 lbs.y
Call for project estimates
Duane - 612-867-0295 |
New Keller USA Model Vario 6.1 Dust Collector
Inside or outside mntg.
7,500 cfm. cap. unit pictured
SINBRAN Long Life or melt blown filters
Spark arrestor hsg.
Silencer Available - low dba levels
Elec control with pressure differential switch
Process Uses:
- Thermal Cutting (Laser,Plasma,Oxy)
- Welding Areas
- Buffing, Grinding, and Sanding areas
- Painting (Liquid or Powder)
- Specialty Processes (per process req)
Call for project estimates
Duane - 612-867-0295 |
1979 TOS XZC3000/25 1"X 10' Pinch Roll
MODEL # XZC3000/25
CAPACITY: 1” X 10-FT
4 ROLL HYDRAULIC
DIAMETER TOP ROLL:
17"
DIAMETER OF SIDE ROLLS
BOTTOM ROLL: 13.5”
PRE-BENDING CAPACITY 1”
MINIMUM ROLL DIAMETER 23.5”
CAPACITY AT 50% LENGTH 1.25” THK @ 60”
MOTOR HP AND VOLTAGE 30 HP 230/460 V
WEIGHT 86,000 LBS
DIMENSIONS: 103” H X 225” W X 23’ 0” L
VERY WELL MAINTAINED
VERY GOOD CONDITION
Price
- $Call |
Rofin-Sinar SM Laser Resonators
- 2000 SM resonator and control
- control cabinet
for parts or re-build
- some Rofin parts, SMPS power supply
Contact us for current list of
any used SM systems and/or components
Contact us for pricing and availability
status |
|
DEMO - (2) Hans Weber De-slagging Units avail
UNIT #1
De-slagging station with a In-Line Planetary Double Rotation Brush station
Hans Weber Model TTSK P(2)-1100 , 43" wide
DEMO Unit Price = $80,950.00 delivered, with on-site training
12 month factory warranty
UNIT #2
Full contact Belt station with a In-Line Planetary Double Rotation Brush station
Hans Weber Model TTS 1P(2)-1100 , 43" wide
DEMO Unit Price = $69,000.00 delivered, with on-site training
12 month factory warranty
* Subject to availability and or prior sale *
Contact Duane @ 612-867-0295
for further information. |
Koolant Koolers Chiller Model SCW 20,000-PR-NF
134A-R
Water to water type
20 hp. compressor
3 hp. pump
Multiple output lines
460/480 v, 3 phase
Price
- $1,300 Loaded on your truck
- Or reasonable offer |
Nikon Wafer
Measurement System
Nikon Model VMR-C4540, NEX1V
NEW, never been used in production
Set-up for wafer carrier measurement
Unit under power for viewing and testing
Manufactured Dec., 2007
Nikon services available for unit "Certification of Accuracy" on installation and system training.
Price
- $Contact for Price and Availability
As Is Where
Is -
Financing Available
Contact Duane
at 612-867-0295 |
|
|
